1.06 Operation and Maintenance

1. Designs and installations shall be carried out to ensure that operation and maintenance requirements are optimised.
2. Energy efficiency shall be maximised by minimising energy consumption while maintaining the required functionality, comfort, and user experience.

SAVORTEX hand dryers meet this standard: Powered at just 450W and 550W, the SAVORTEX range is among the world’s most energy-efficient smart warm air hand dryers, delivering exceptional performance with minimal energy consumption.

2.04 WARRANTIES

1. Unless otherwise stated within the individual specification sections, all equipment shall be covered by a minimum 12-month warranty from the date of handover.
2. All warranties shall include both parts and labour.
3. Manufacturers shall ensure that defective products are repaired within a reasonable timeframe. If a repair cannot be completed promptly, the product shall be replaced at no additional cost, or a temporary replacement unit shall be provided to maintain service continuity.
4. Where recurring defects occur, warranty periods shall be extended appropriately to ensure the product performs as intended.

SAVORTEX smart hand dryers exceed this standard: Every SAVORTEX hand dryer is backed by an industry-leading 5-year parts warranty, providing long-term reliability and peace of mind.

Appendix 15.9 – LEED Concept Report

It can be seen from the extract above that no energy savings are expected from “Other Process Loads”.

SAVORTEX smart hand dryers exceed this standard: The SAVORTEX hand dryer range is 50%–88% more energy efficient than conventional hand dryers, helping reduce energy consumption where no savings are otherwise expected.

9.3 ID c1.3: Green Cleaning (1 Point)

The Client will implement a Green Cleaning Plan to ensure the building remains environmentally friendly while providing a clean and healthy environment for occupants.

• Use environmentally friendly cleaning products with accurate chemical management systems.
• Reduce airborne particles and chemicals.
• Carry out effective vacuuming, extraction, rinsing and drying.
• Mechanically capture and remove dirt.
• Apply disinfectants only where necessary.
• Promote safety and prevent cross-contamination.
• Focus on preventative cleaning measures.
• Use environmentally responsible paper products.
• Promote recycling programmes to reduce waste.

SAVORTEX smart hand dryers support this standard: Our hygienic brushless motor and antibacterial technology help create a cleaner and healthier washroom environment.

9.5 ID c1.5: Advanced Energy Metering – LEED Pilot Credit 26 (1 Point)

The contractor shall install advanced energy metering for all whole-building energy sources and major end uses representing 10% or more of annual building energy consumption.

• Meters shall be permanently installed and record data at intervals of one hour or less.
• Electrical meters shall record both energy consumption and demand.
• Data shall be stored for a minimum of 18 months.

SAVORTEX smart hand dryers exceed this standard: SAVORTEX is the only smart hand drying technology with built-in real-time energy metering and reporting capabilities, supporting advanced energy monitoring requirements.